Sorption, diffusivity, permeability and mechanical properties of chitosan, potassium sorbate, or nisin incorporated active polymer films
[ X ]
Tarih
2020
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Springer India
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
The active multilayer packaging films were formed from low-density polyethylene (LDPE) and polyamide containing a 2% antimicrobial agent in one of the LDPE sides of the film (LDPE/polyamide/LDPE-2% antimicrobial agent). The antimicrobial agents used were potassium sorbate (PS-film), nisin (N-film), or chitosan (CTS-film). The effects of antimicrobial incorporation on water vapor permeability (P), diffusivity (D-eff), and solubility (S-o and S-H) of the active and control films (LDPE/polyamide/LDPE) were investigated. A dynamic vapor sorption analyzer (DVS) was used to estimate the sorption isotherms of the films at 25 degrees C. Peleg was found to be the best equation to describe sorption behaviors. The addition of PS and nisin into the film matrix resulted in a lower P than that of the control film. The D-eff values of the active films were lower than those of control films, except for the CTS-film. The high water-holding capacity of PS and nisin might limit the D-eff of the respective films. It was found that Henry's law was applicable to relate P, D-eff, and S-o and S-H values of the multilayer film [correlation coefficient (r) = 0.909-0.971]. The mechanical and thermal properties of the active films were not significantly affected by the incorporation of PS and nisin (p > 0.05). However, the impact of stress and elongation (transverse direction) on the CTS-film was lower than on other films, which indicated that chitosan improved the mechanical properties of the film.
Açıklama
Anahtar Kelimeler
Antimicrobial active film, Sorption, Diffusion, Permeability, Mechanical and thermal properties
Kaynak
Journal of Food Science and Technology-Mysore
WoS Q Değeri
Q3
Scopus Q Değeri
Q1
Cilt
57
Sayı
10
