Effect of surface roughness characteristics on the uplift capacity of piles: A physical modelling study
[ X ]
Tarih
2023
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Taylor & Francis Inc
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
Pile surface roughness is one of the significant variables affecting the load-bearing capacity of piles. Especially for piles subjected to uplift loads, this parameter can be considered as the main factor that affects the uplift capacity since there is no contribution originating from the pile tip. According to limited previous research, a pile surface can be evaluated as smooth if pile surface roughness parameter (R-n) is less than 0.02, whereas the pile surface is considered completely rough when R-n value is greater than 0.10. This paper, therefore, is aimed to investigate the validity and effectiveness of the numerical limits previously suggested for R-n and intends to determine the relationship between R-n and soil-pile friction angle. For this purpose, laboratory model tests were performed on 12 small-scale pile models embedded in cohesionless soils having varying densities (D-r=25%, 50%, and 75%). Pile surfaces were specially textured to produce different surface roughness values from 0 to 2. Test results indicated that increasing the relative density of cohesionless soil and the pile surface roughness had a considerable contribution to the uplift capacity and soil-pile friction angle. Furthermore, some typical values of R-n like 0, 0.04, and 0.10 were found to be critical for pile uplift behaviour and capacity, and R-n value should be accepted as zero to consider the pile surface as completely smooth.
Açıklama
Anahtar Kelimeler
Cohesionless soil, laboratory model test, pile surface roughness, soil-pile friction angle, uplift capacity
Kaynak
Marine Georesources & Geotechnology
WoS Q Değeri
Q2
Scopus Q Değeri
Q1
Cilt
41
Sayı
8
