NUMERICAL INVESTIGATION OF HEAT TRANSFER FROM A POROUS PLATE WITH TRANSPIRATION COOLING

dc.authoridKILIC, MUSTAFA/0000-0002-8006-149X
dc.contributor.authorKılıç, Mustafa
dc.date.accessioned2025-01-06T17:37:05Z
dc.date.available2025-01-06T17:37:05Z
dc.date.issued2018
dc.description.abstractThe present study is focused on investigation of heat transfer from a porous plate by cooling of air and surface with transpiration cooling. Effects of Reynolds number of hot air (Re= 3035, 3200, 3300, 3580), effects of flow rate of water as a coolant ((m)over dot(water) 0.000083, 0.000116, 0.000166, 0.000249 kg/s) on local wall temperature and cooling efficiency of porous flat and the system inside a rectangular channel with air as a hot gas stream and water as a coolant were investigated numerically. In this study; different from the literature, transpiration cooling was used as a cooling mechanism of air. It was observed from the results that increasing Reynolds number causes an increase on surface temperature and a decrease on cooling efficiency of porous plate and system. Increase of Reynolds number from Re=3035 to 9430 causes a decrease of efficiency of the system of 13.7%. Increasing water flow rate nine times causes not only a decrease on average surface temperature of 1.1% but also an increase of 6.5% on efficiency of porous plate and an increase of 19.1% on cooling efficiency of the system. Numerical results prepared by RNG k-E turbulence model generally have a good approximation with experimental results.
dc.description.sponsorshipScientific Research Council of Turkey (TUBITAK) [2219]; University of California Los Angeles Post Doctorate Program (UCLA/USA)
dc.description.sponsorshipThis study was funded by the Scientific Research Council of Turkey (TUBITAK), with the program of postdoctoral scholarship (2219) and University of California Los Angeles Post Doctorate Program (UCLA/USA). Especially contributions of Prof. Vijay K. Dhir's Boiling Heat Transfer Laboratory are gratefully appreciated.
dc.identifier.doi10.18186/journal-of-thermal-engineering.362048
dc.identifier.endpage1647
dc.identifier.issn2148-7847
dc.identifier.issue1
dc.identifier.scopus2-s2.0-85038832465
dc.identifier.scopusqualityQ3
dc.identifier.startpage1632
dc.identifier.urihttps://doi.org/10.18186/journal-of-thermal-engineering.362048
dc.identifier.urihttps://hdl.handle.net/20.500.14669/2109
dc.identifier.volume4
dc.identifier.wosWOS:000429265200001
dc.identifier.wosqualityN/A
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherYildiz Technical Univ
dc.relation.ispartofJournal of Thermal Engineering
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_20241211
dc.subjectComputational Fluid Dynamics
dc.subjectHeat Transfer
dc.subjectPorous Plate
dc.subjectTranspiration cooling
dc.titleNUMERICAL INVESTIGATION OF HEAT TRANSFER FROM A POROUS PLATE WITH TRANSPIRATION COOLING
dc.typeArticle

Dosyalar