Model studies on recycled whole rubber tyre reinforced granular fillings on weak soil

Basit Öğe Kaydı
dc.authoridOK, BAHADIR/0000-0001-8333-5671
dc.contributor.authorGeckil, Tacettin
dc.contributor.authorSarici, Talha
dc.contributor.authorOk, Bahadir
dc.date.accessioned2025-01-06T17:44:18Z
dc.date.available2025-01-06T17:44:18Z
dc.date.issued2022
dc.description.abstractThe main purpose of this study is to determine the stress-strain behaviour of a rigid circular footing placed on recycled rubber tyre-reinforced granular filling built on weak soil. For this purpose, model plate loading tests were carried out on reinforced/unreinforced granular filling built with natural aggregates (NA) or construction and demolition waste materials (CDW). The rubber tyre used for reinforcement has become a waste material by completing its service life but it has retained its typical cylindrical shape. In model plate loading tests, the effects of the granular fillings, the type of fillings material and the placement of whole rubber tyre and/or geotextile in the granular fillings were investigated. Depending on the results of tests, it was determined that the bearing capacity was increased by reinforcing with the rubber tyre and/or the geotextile. Furthermore, it was specified that the highest increase in bearing capacity was occurred case of by reinforcing with the geotextile together with the rubber tyre of the granular filling. The CDW and the NA fills reinforced with geotextile together with the rubber tyre increased the bearing capacity of weak soils by 6.59 and 8.49 times, respectively, for the 5% deformation ratio. On the other hand, it was reported that although the bearing capacity of the NA was higher than that of the CDW, the bearing capacity of the reinforced CDW approached that of the NA.
dc.description.sponsorshipInonu University Scientific Research Project Department [FBG-2018957]
dc.description.sponsorshipThis study was supported by Inonu University Scientific Research Project Department with FBG-2018957 project number.
dc.identifier.doi10.7764/RDLC.21.2.264
dc.identifier.endpage280
dc.identifier.issn0718-915X
dc.identifier.issue2
dc.identifier.scopus2-s2.0-85137639687
dc.identifier.scopusqualityQ3
dc.identifier.startpage264
dc.identifier.urihttps://doi.org/10.7764/RDLC.21.2.264
dc.identifier.urihttps://hdl.handle.net/20.500.14669/2981
dc.identifier.volume21
dc.identifier.wosWOS:000870670600006
dc.identifier.wosqualityQ4
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherPontificia Univ Catolica Chile, Escuela Construccion Civil
dc.relation.ispartofRevista De La Construccion
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_20241211
dc.subjectRubber tyre
dc.subjectgeotextile
dc.subjectsoil improvement
dc.subjectgranular fillings
dc.subjectconstruction
dc.subjectdemolition waste
dc.titleModel studies on recycled whole rubber tyre reinforced granular fillings on weak soil
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu