Experimental and numerical analysis of fracture parameters of adhesively bonded joints at low temperatures

Basit Öğe Kaydı
dc.authoridRahmani, Azhdar/0000-0001-7140-2312
dc.authoridCHOUPANI, NAGHDALI/0000-0001-7872-6408
dc.contributor.authorRahmani, A.
dc.contributor.authorChoupani, N.
dc.date.accessioned2025-01-06T17:36:07Z
dc.date.available2025-01-06T17:36:07Z
dc.date.issued2019
dc.description.abstractIn this work, the fracture parameters of the adhesive joints were investigated at low temperatures. The results of the tensile experiments showed that by decreasing the temperature, the ultimate strength, yield strength and elastic modulus have increasing trends. The effect of temperature and loading mode on the fracture toughness parameters of adhesive joints were examined by using the special test loading device in which by varying the loading angle, pure mode I, II and mixed mode data were obtained experimentally. The results showed that by decreasing the temperature, critical stress intensity factors and critical strain energy release rates increased. However, the increasing trend in mode I was gentle and in mode II was significant. Non-dimensional stress intensity factors were also determined by using finite element method at low temperatures and different loading modes. In order to understand the failure mechanism of adhesive joints, fracture surfaces of samples were analyzed, which showed that, in mode I, the failure mechanism was of a cohesive type and by decreasing the temperature, the joint became brittle and the fracture surface became smooth. The interfacial failure in mode II revealed that the fracture toughness of the adhesive was greater than that of the interface, which leads to deviation of crack growth path from the cohesive to the interfacial fracture.
dc.identifier.doi10.1016/j.engfracmech.2018.12.031
dc.identifier.endpage236
dc.identifier.issn0013-7944
dc.identifier.issn1873-7315
dc.identifier.scopus2-s2.0-85059470975
dc.identifier.scopusqualityQ1
dc.identifier.startpage222
dc.identifier.urihttps://doi.org/10.1016/j.engfracmech.2018.12.031
dc.identifier.urihttps://hdl.handle.net/20.500.14669/1765
dc.identifier.volume207
dc.identifier.wosWOS:000455955700014
dc.identifier.wosqualityQ1
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherPergamon-Elsevier Science Ltd
dc.relation.ispartofEngineering Fracture Mechanics
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_20241211
dc.subjectAdhesive joints
dc.subjectFracture mechanics
dc.subjectLow temperatures
dc.subjectFinite element analysis
dc.titleExperimental and numerical analysis of fracture parameters of adhesively bonded joints at low temperatures
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu