Experimental study and hybrid optimization of material extrusion process parameters for enhancement of fracture resistance of biodegradable nanocomposites
[ X ]
Tarih
2023
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Pergamon-Elsevier Science Ltd
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
Among the additive manufacturing processes, the material extrusion (ME) is the most popular and affordable technique in production of a wide range of products, from prototypes to the final products, for different industrial sectors. The most popular raw material in this process is the biodegradable polylactic acid (PLA) polymer that offers ease of production in relatively low price and wide applications in synthesis of medical proteases. However, the mechanical strength of fabricated samples and their resistance against the fracture loadings, which are critical for components synthesized for medical applications, are strongly dependent on the ME process parameters and the composition of the base material. Therefore, this study is aimed to address both the strengthening mechanisms of inorganic CaCO3 nanoadditives in the PLA matrix and the influence of ME process parameters on the fracture resistance of fabricated samples. To this aim, the PLA/CaCO3 nanocomposite filaments have been produced by mix-blending/extrusion tech-nique and were employed to fabricate tensile and fracture test samples in ME process under different sets of parameters, including printing speed, layer thickness, filling ratio and printing pattern, determined by Taguchi L27 orthogonal array. The fracture experiments were conducted on a uniaxial tensile test machine using a specially designed fixture that makes the application of mixed-mode loading on fracture samples possible. The results of fracture toughness of specimens were employed as input data to model the response of fabricated samples and to determine the ME parameter levels and nanoparticle concentrations for maximum fracture resistance of fabri-cated samples based on a hybrid algorithm of artificial neural network and ant colony optimi-zation (ANN/ACO). Differential scanning calorimetry was used to characterize the thermal features (i.e. glass transition, crystallization and melting temperatures) as well as the degree of crystallization of ME samples. Scanning electron microscopy of fracture surfaces were employed to study the influence of ME parameters and CaCO3 nanoadditives on the characteristics of fracture of 3D printed specimens under various modes of loading. Overall, the results showed that the effects of ME parameters on the fracture behavior of 3D printed samples are highly inter-connected and, in the case of a semicrystalline polymer, are highly dependent on the physical characteristics of the fabrication process, including the heat transfer and crystallization rate of the matrix.
Açıklama
Anahtar Kelimeler
PLA, CaCO3 nanocomposite, ANN, ACO, Material extrusion parameters, Nanoadditive concentration, Fracture toughness
Kaynak
Engineering Failure Analysis
WoS Q Değeri
Q1
Scopus Q Değeri
Q1
Cilt
150
