Applied Genetic Programming for Predicting Specific Cutting Energy for Cutting Natural Stones
[ X ]
Tarih
2017
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Taylor & Francis Inc
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
In the processing of marbles and other natural stones, the major cost involved in sawing with circular diamond sawblades is the energy cost. This paper reports a new and efficient approach to the formulation of SEcut using gene expression programming (GEP) based on not only rock characteristics but also design and operating parameters. Twenty-three rock types classified into four groups were cut using three types of circular diamond saws at different feed rates, depths of cut, and peripheral speeds. The input parameters used to develop the GEP-based SEcut prediction model were as follows: physicomechanical rock characteristics (uniaxial compressive strength, Shore scleroscope hardness, Schmidt rebound hardness, and Bohme surface abrasion), operating parameters (feed rate, depth of cut, and peripheral speed), and a design variable (diamond concentration in the sawblade). The performance of the model was comprehensively evaluated on the basis of statistical criteria such as R-2 (0.95).
Açıklama
Anahtar Kelimeler
Cırcular Dıamond Saws, Carbonate Rocks, Regressıon-Analysıs, Block-Cutter, Sawabılıty, Parameters, Fuzzy, Models
Kaynak
Applied Artificial Intelligence
WoS Q Değeri
Q4
Scopus Q Değeri
Q2
Cilt
31
Sayı
5-6