Experimental and numerical investigation of flow field and heat transfer from electronic components in a rectangular channel with an impinging jet

Basit Öğe Kaydı
dc.authoridCalisir, Tamer/0000-0002-0721-0444
dc.authoridKILIC, MUSTAFA/0000-0002-8006-149X
dc.authoridBaskaya, Senol/0000-0001-9676-4387
dc.contributor.authorCalisir, Tamer
dc.contributor.authorKoseoglu, M. Fevzi
dc.contributor.authorKılıç, Mustafa
dc.contributor.authorBaşkaya, Şenol
dc.date.accessioned2025-01-06T17:45:08Z
dc.date.available2025-01-06T17:45:08Z
dc.date.issued2015
dc.description9th International Conference on Experimental Fluid Mechanics -- NOV 18-21, 2014 -- Cesky Krumlov, CZECH REPUBLIC
dc.description.abstractThermal control of electronic components is a continuously emerging problem as power loads keep increasing. The present study is mainly focused on experimental and numerical investigation of impinging jet cooling of 18 (3 x 6 array) flash mounted electronic components under a constant heat flux condition inside a rectangular channel in which air, following impingement, is forced to exit in a single direction along the channel formed by the jet orifice plate and impingement plate. Copper blocks represent heat dissipating electronic components. Inlet flow velocities to the channel were measured by using a Laser Doppler Anemometer (LDA) system. Flow field observations were performed using a Particle Image Velocimetry (PIV) and thermocouples were used for temperature measurements. Experiments and simulations were conducted for Re 4000 8000 at fixed value of H 10 x D-h. Flow field results were presented and heat transfer results were interpreted using the flow measurement observations. Numerical results were validated with experimental data and it was observed that the results arc in agreement with the experiments.
dc.description.sponsorshipDANTEC Dynam GmbH,LaVis,MECAS ESI s r o,MIT s r o,TSI GmbH
dc.identifier.doi10.1051/epjconf/20159202009
dc.identifier.issn2100-014X
dc.identifier.scopus2-s2.0-84937500627
dc.identifier.scopusqualityN/A
dc.identifier.urihttps://doi.org/10.1051/epjconf/20159202009
dc.identifier.urihttps://hdl.handle.net/20.500.14669/3324
dc.identifier.volume92
dc.identifier.wosWOS:000358249900011
dc.identifier.wosqualityN/A
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherE D P Sciences
dc.relation.ispartofEfm14 - Experimental Fluid Mechanics 2014
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_20241211
dc.subjectSurface
dc.subjectModels
dc.subjectArray
dc.titleExperimental and numerical investigation of flow field and heat transfer from electronic components in a rectangular channel with an impinging jet
dc.typeConference Object

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu