Effect of adherend recessing on bi-adhesively bonded single-lap joints with spew fillet

Basit Öğe Kaydı
dc.authoridCalik, Ahmet/0000-0001-7425-4546
dc.authoridYildirim, Sefa/0000-0002-9204-5868
dc.contributor.authorCalik, Ahmet
dc.contributor.authorYildirim, Sefa
dc.date.accessioned2025-01-06T17:36:39Z
dc.date.available2025-01-06T17:36:39Z
dc.date.issued2017
dc.description.abstractThe effect of adherend recessing on the strength of full (spew)-fillet-formed bi-adhesively bonded single-lap joint (SLJ) was investigated using the finite-element (FE) method under pure tension (i.e., 20 dissimilar recess length and depth and two-type bi-adhesive bond). A three-dimensional (3D) FE model was developed for bi-adhesively bonded SLJ, which had fillet and recessed adherend, assuming that both adhesive and adherend have geometrical non-linearity and exhibit linear material behaviour. The novelty of present study is the application of recessing process on the fillet-formed bi-adhesively bonded SLJs. The bondline characteristics of bi-adhesively bonded joints with the effect of adherend recessing have been investigated by examining the distributions of the peel and maximum principle stresses (MPS) at the mid-plane of the bondline. The results from the FE simulations in which varying geometric parameters are used reveal that the combined effects of adherend recessing spew fillet and bi-adhesive bondline led to a major decrease in the peak values of the peel stress, which is the governing failure stress and MPS. A novel design that may be beneficial to improve the strength characteristics of aluminium SLJ is presented.
dc.identifier.doi10.1007/s12046-017-0603-2
dc.identifier.endpage325
dc.identifier.issn0256-2499
dc.identifier.issn0973-7677
dc.identifier.issue3
dc.identifier.scopus2-s2.0-85012188503
dc.identifier.scopusqualityQ1
dc.identifier.startpage317
dc.identifier.urihttps://doi.org/10.1007/s12046-017-0603-2
dc.identifier.urihttps://hdl.handle.net/20.500.14669/1934
dc.identifier.volume42
dc.identifier.wosWOS:000398923100004
dc.identifier.wosqualityQ4
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherIndian Acad Sciences
dc.relation.ispartofSadhana-Academy Proceedings in Engineering Sciences
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_20241211
dc.subjectBi-adhesive
dc.subjectadherend recessing
dc.subjectspew fillet
dc.subjectsingle-lap joints
dc.subjectfinite-element method
dc.titleEffect of adherend recessing on bi-adhesively bonded single-lap joints with spew fillet
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu