Investigation of Performance Properties of Denim Fabrics Containing Cotton/Sustans® Blend Rotor Yarn

Basit Öğe Kaydı
dc.authoridOzkan, Muhittin/0000-0001-8749-5605
dc.contributor.authorOzkan, Muhittin
dc.contributor.authorBaykal, Pinar Duru
dc.contributor.authorOzkan, Ilkan
dc.date.accessioned2025-01-06T17:37:29Z
dc.date.available2025-01-06T17:37:29Z
dc.date.issued2022
dc.description.abstractIt is common to use open-end rotor yarn in the production of denim fabric, which is preferred by people of all ages and social status due to its durability and comfort. Recently, the demand for stretch denim fabrics that can take the body's shape due to the elastic fibers in its structure has been increasing. However, producing elastane-containing yarns in the rotor spinning system is not as practical as ring spinning. For this reason, this study aimed to use the staple Sustans (R) fibers with high elasticity in the rotor spinning system together with cotton fibers and reflect the good elasticity and elongation properties of Sustans (R) fibers to the rotor yarns and denim fabrics. In the study, the staple Sustans (R) fibers based on PTT (Polytrimethylene Terephthalate) were spun with cotton fibers in the rotor spinning system. Then denim fabrics were produced using these yarns in the weft. Later, strength (breaking and tear), dimensional stability (dimensional change after washing, fabric elasticity and growth), abrasion resistance and pilling tests were applied to the produced denim fabrics. Thus, the effects of using Sustans (R) fibers on the strength, dimensional stability, abrasion and pilling properties of denim fabrics were analyzed. As a result of the study, the dimensional change and growth values after washing were developed by using Sustans (R). Although good dimensional stability was observed in the samples, the degree of elasticity was lower than expected. The use of Sustans (R) at rates of 50% and above improved the pilling values of the fabrics. In addition, it has been determined that the use of Sustans (R) in terms of abrasion resistance has a more positive effect at the end of long wear periods.
dc.identifier.doi10.32710/tekstilvekonfeksiyon.996502
dc.identifier.endpage326
dc.identifier.issn1300-3356
dc.identifier.issue4
dc.identifier.scopus2-s2.0-85166261629
dc.identifier.scopusqualityQ3
dc.identifier.startpage314
dc.identifier.urihttps://doi.org/10.32710/tekstilvekonfeksiyon.996502
dc.identifier.urihttps://hdl.handle.net/20.500.14669/2223
dc.identifier.volume32
dc.identifier.wosWOS:000910581200003
dc.identifier.wosqualityQ4
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherE.U. Printing And Publishing House
dc.relation.ispartofTekstil Ve Konfeksiyon
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_20241211
dc.subjectDenim fabrics
dc.subjectOE rotor yarn
dc.subjectpolytrimethylene terephthalate (PTT)
dc.subjectSorona (R)
dc.subjectSustans (R)
dc.subjectelasticity and growth
dc.subjectabrasion resistance
dc.subjectpilling
dc.titleInvestigation of Performance Properties of Denim Fabrics Containing Cotton/Sustans® Blend Rotor Yarn
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu