INVESTIGATION OF MECHANICAL AND METALLOGRAPHIC PROPERTIES OF TWO DIFFERENT ALUMINUM ALLOYS JOINED WITH FRICTION STIR WELDING METHOD USING DIFFERENT WELDING PARAMETERS

Basit Öğe Kaydı
dc.contributor.authorÖcalir, Şeref
dc.contributor.authorEşme, Uğur
dc.contributor.authorBoğa, Cem
dc.contributor.authorKülekci, Mustafa Kemal
dc.date.accessioned2025-01-06T17:30:37Z
dc.date.available2025-01-06T17:30:37Z
dc.date.issued2020
dc.description.abstractIn this study two aluminum alloy materials of EN AW-5083-H111 and EN AW-6082-T651 were joined with Friction Stir Welding considering the parameters as the tool shoulder diameter, spindle speed and feed rate. The mechanical properties of the weld joints such as yield strength, tensile strength and micro-hardness and metallographic properties were investigated comparatively with the use of these welding parameters. The yield strength of the weld joints were determined to be between 136-217 MPa while the tensile strengths were between 159-230 MPa and the percent elongations were between 2.28-5.44 %. The hardness values measured in weld areas were higher in the EN AW-6082 base metal side compared with EN AW-5083 base metal side. © 2020 Yildiz Technical University.
dc.identifier.endpage1349
dc.identifier.issn1304-7191
dc.identifier.issue3
dc.identifier.scopus2-s2.0-85149887665
dc.identifier.scopusqualityQ3
dc.identifier.startpage1333
dc.identifier.urihttps://hdl.handle.net/20.500.14669/1678
dc.identifier.volume38
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherYildiz Technical University
dc.relation.ispartofSigma Journal of Engineering and Natural Sciences
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_20241211
dc.subjectAluminum alloy
dc.subjectfriction stir welding (FSW)
dc.subjectmechanical properties
dc.subjectmetallographic properties
dc.titleINVESTIGATION OF MECHANICAL AND METALLOGRAPHIC PROPERTIES OF TWO DIFFERENT ALUMINUM ALLOYS JOINED WITH FRICTION STIR WELDING METHOD USING DIFFERENT WELDING PARAMETERS
dc.typeArticle

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu