Finite Element Analyses of Stresses Developed in Oil Separator Composite Tank Used in Screw Type Compressor Systems

Basit Öğe Kaydı
dc.contributor.authorGezginci, Volkan
dc.contributor.authorBoğa, Cem
dc.contributor.authorSeyedzavvar, Mirsadegh
dc.date.accessioned2025-01-06T17:22:40Z
dc.date.available2025-01-06T17:22:40Z
dc.date.issued2022
dc.departmentAdana Alparslan Türkeş Bilim ve Teknoloji Üniversitesi
dc.description.abstractPressure vessels are geometrically cylindrical, spherical or conical work equipment used for the storage and transportation of pressurized fluid. In the case of design and/or manufacturing deficiency, or for the case of improper applications of such vessels due to working conditions, the damages that may occur can cause serious harm to the environment and employees. The aim of this study is to estimate the performance of a typical oil separator pressure vessel used in screw compressor systems, exposed to high pressure and temperature, using finite element method. Here, the aim is to estimate performance of this tank after modifications in design and to compare the results with that of pressure vessel designed using conventional materials. The inner liner of the separator tank is metal material and the other layers are wrapped with three different composite materials, including carbon fiber/epoxy, glass fiber/epoxy and kevlar fiber/epoxy, at different angles, and then were exposed to high pressures in the environment of finite element simulation software. As a result of the study, stress and deformation values were examined and the most suitable material and orientation angle for the composite pressure vessel were decided. According to the results, it was observed that the lowest first-ply equivalent stress value was obtained in glass fiber/epoxy coated separator tanks at 11.25 bar pressure and 45 degree winding angle. In addition, it was observed that the lowest total deformation value was obtained in kevlar fiber/epoxy coated separator tanks at 11.25 bar pressure and 45 degree winding angle.
dc.identifier.doi10.17798/bitlisfen.1176937
dc.identifier.endpage1101
dc.identifier.issn2147-3129
dc.identifier.issn2147-3188
dc.identifier.issue4
dc.identifier.startpage1093
dc.identifier.trdizinid1149364
dc.identifier.urihttps://doi.org/10.17798/bitlisfen.1176937
dc.identifier.urihttps://search.trdizin.gov.tr/tr/yayin/detay/1149364
dc.identifier.urihttps://hdl.handle.net/20.500.14669/449
dc.identifier.volume11
dc.indekslendigikaynakTR-Dizin
dc.language.isoen
dc.relation.ispartofBitlis Eren Üniversitesi Fen Bilimleri Dergisi
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_20241211
dc.subjectMalzeme Bilimleri
dc.subjectÖzellik ve Test
dc.subjectPolimer Bilimi
dc.subjectMühendislik
dc.subjectKimya
dc.titleFinite Element Analyses of Stresses Developed in Oil Separator Composite Tank Used in Screw Type Compressor Systems
dc.typeArticle

Dosyalar

Koleksiyon

TR-Dizin İndeksli Yayınlar Koleksiyonu