Optimization of the Effect of Processing Parameters on Surface Roughness and Cutting Energy in CNC Milling of Al-7075 Material
[ X ]
Tarih
2020
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
In this study, it is intended to determine the most suitable process parameters for surface roughness and cutting energy of the 7075 series aluminum material in dry environment conditions by using Taguchi method in CNC milling. The process parameters were determined as, cutting speed, feed rate and cutting depth and the effects of these parameters on surface roughness, current flow through the grid and the energy consumed were examined. As a result, optimum process parameters were determined and the results were analyzed by graphs. It was observed that the most effective parameter on the surface roughness was the feed rate, while the most effective parameter on the current drawn from the network was the cutting depth. As a result of the experiments, the best surface roughness value was found to be 0.39 ?m and the lowest current value was 0.9 A. In addition, considering the determined current amount and processing time, the lowest energy amount consumed was calculated as 7089.28 J.
Açıklama
Anahtar Kelimeler
Kaynak
Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi
WoS Q Değeri
Scopus Q Değeri
Cilt
35
Sayı
2
