Arşiv logosu
  • Türkçe
  • English
  • Giriş
    Yeni kullanıcı mısınız? Kayıt için tıklayın. Şifrenizi mi unuttunuz?
Arşiv logosu
  • Koleksiyonlar
  • Sistem İçeriği
  • Analiz
  • Talep/Soru
  • Türkçe
  • English
  • Giriş
    Yeni kullanıcı mısınız? Kayıt için tıklayın. Şifrenizi mi unuttunuz?
  1. Ana Sayfa
  2. Yazara Göre Listele

Yazar "Ozgur, Tayfun" seçeneğine göre listele

Listeleniyor 1 - 2 / 2
Sayfa Başına Sonuç
Sıralama seçenekleri
  • [ X ]
    Öğe
    Comparison of effects of nanofluid utilization (Al2O3, SiO2, TiO2) with reference water in automotive radiators on exergetic properties of diesel engines
    (Springer Int Publ Ag, 2021) Erkan, Anil; Tuccar, Goekhan; Tosun, Erdi; Ozgur, Tayfun
    In this study, nanofluids formed by using ethylene glycol and three kinds of nanoparticles such as Al2O3, SiO2, and TiO2 were added to the four-stroke internal combustion engine radiator and compared with the conventional coolant (pure water). This comparison is based on the exergy performances which are the main theme of the second law of thermodynamics. The tests were carried out at a fixed engine speed of 1800 rpm using diesel fuel, and the outputs were obtained from the test setup experimentally. A total of six nanofluid tests were performed on two different dispersions (0.2% and 0.4%). As a result of this study, the best exergy efficiency was obtained by using TiO2 particles with a 35.67% value. Increasing the percentage of nanoparticles in the fluid from 0.2 to 0.4 positively affected efficiency. Pure water generally lagged behind nanofluid performance in experimental parameters. Compared to conventional coolant (pure water), the lowest exhaust temperature value was measured by using an Al2O3/Ethylene Glycol mixture with a difference of 59 K. Also, by using Al2O3 nanoparticles as a coolant, 8.858 kW of exergy exhaust value was obtained. This is the best emission value measured in the experimental study. While calculating values close to each other in the use of other nanoparticles, the worst exergy exhaust results were obtained by using the conventional refrigerant. Consequently, in this paper, exergetic outputs such as exergetic efficiency, exergy destruction, exergy heat, exergy work, exergy total exhaust, and entropy production rate were calculated for pure water and each nanofluid.
  • [ X ]
    Öğe
    Investigation the fuel properties of apricot kernel biodiesel and diesel-biodiesel fuel blends
    (Elsevier Science Bv, 2018) Ozgur, Ceyla; Yakaryilmaz, Ali Cem; Tosun, Erdi; Akar, Mustafa Atakan; Ozgur, Tayfun
    [Abstract Not Available]

| Adana Alparslan Türkeş Bilim ve Teknoloji Üniversitesi | Kütüphane | Rehber | OAI-PMH |

Bu site Creative Commons Alıntı-Gayri Ticari-Türetilemez 4.0 Uluslararası Lisansı ile korunmaktadır.


Balcalı Mahallesi, Güney Kampüs, 10. Sokak, No: 1U, Sarıçam, Adana, TÜRKİYE
İçerikte herhangi bir hata görürseniz lütfen bize bildirin

DSpace 7.6.1, Powered by İdeal DSpace

DSpace yazılımı telif hakkı © 2002-2025 LYRASIS

  • Çerez Ayarları
  • Gizlilik Politikası
  • Son Kullanıcı Sözleşmesi
  • Geri Bildirim