Arşiv logosu
  • Türkçe
  • English
  • Giriş
    Yeni kullanıcı mısınız? Kayıt için tıklayın. Şifrenizi mi unuttunuz?
Arşiv logosu
  • Koleksiyonlar
  • Sistem İçeriği
  • Analiz
  • Talep/Soru
  • Türkçe
  • English
  • Giriş
    Yeni kullanıcı mısınız? Kayıt için tıklayın. Şifrenizi mi unuttunuz?
  1. Ana Sayfa
  2. Yazara Göre Listele

Yazar "Kececioglu, Sevda Ceren" seçeneğine göre listele

Listeleniyor 1 - 1 / 1
Sayfa Başına Sonuç
Sıralama seçenekleri
  • [ X ]
    Öğe
    The effect of leading-edge tubercle on a tapered swept-back SD7032 airfoil at a low Reynolds number
    (Pergamon-Elsevier Science Ltd, 2022) Seyhan, Mehmet; Akbiyik, Hurrem; Sarioglu, Mustafa; Kececioglu, Sevda Ceren
    An experimental study is performed to research the effect of the implemented leading-edge tubercles on the tapered swept-back SD7032 airfoil at Re of 5.5 x 104 and 1.1 x 105. In this study, along with a baseline model with no tubercles (T0), in total four different configurations are used for analysis of the aerodynamic charac-teristics. In the other three models (T1, T2, T3) mainly different amplitude and wavelength modulations are studied. In all experimental studies, force measurements are performed by using a six-axis load cell force measurement device. To achieve detailed information on the flow field of all models, surface oil flow visuali-zation technique is used for visualization purposes at Re = 1.1 x 105. The geometric specifications of the model are the sweep angle of 300, the tip chord of 37.5 mm, the root chord of 112.5 mm, and the span of 300 mm. Airfoil models with the LE tubercles significantly improve lift curve at almost all AoAs as compared to the baseline model. The streamwise vortices are positioned together more closely leading to interaction with each other. Consequently, these interactions lead to an increase in turbulence. This increase in turbulence may lead to a better mixing and increase in momentum exchange in the boundary layer. Amongst the models (T1-T3), the best airfoil model is determined as T3, having a1 = 0.06c, lambda 1 = 0.5c, a2 = 0.015c, and lambda 2 = 0.125c parameters, in terms of lift, drag and CL/CD ratios.

| Adana Alparslan Türkeş Bilim ve Teknoloji Üniversitesi | Kütüphane | Rehber | OAI-PMH |

Bu site Creative Commons Alıntı-Gayri Ticari-Türetilemez 4.0 Uluslararası Lisansı ile korunmaktadır.


Balcalı Mahallesi, Güney Kampüs, 10. Sokak, No: 1U, Sarıçam, Adana, TÜRKİYE
İçerikte herhangi bir hata görürseniz lütfen bize bildirin

DSpace 7.6.1, Powered by İdeal DSpace

DSpace yazılımı telif hakkı © 2002-2025 LYRASIS

  • Çerez Ayarları
  • Gizlilik Politikası
  • Son Kullanıcı Sözleşmesi
  • Geri Bildirim