Yazar "Elfergani, Issa" seçeneğine göre listele
Listeleniyor 1 - 2 / 2
Sayfa Başına Sonuç
Sıralama seçenekleri
Öğe Characterizations of Effective Parameters and Circuit Modeling of U-Coupled Hybrid Ring Resonator Band Pass Filter(IEEE-Inst Electrical Electronics Engineers Inc, 2025) Varshney, Atul; Gencoglan, Duygu Nazan; Elfergani, Issa; Rodriguez, Jonathan; Zebiri, Chemseddine; Neebha, T. MaryA two-port symmetrical, reciprocal, U-shaped mutually coupled hybrid ring resonator for ISM, L-band, and S-band applications is presented. The designed resonator is novel with a hybrid ring which comprises a square ring, a circular ring, and two U-shaped couplers for effective mutual coupling between rings and microstrip feeds. The proposed resonator serves as a bandpass filter with a passband ranging from 1.31 GHz to 2.68 GHz. This design offers superior performance compared to conventional ring resonators. The equivalent circuit model of the hybrid ring resonator validated the behavior of the filtering action. The resonator is validated using the measurement of reflection and transmission coefficients. The comparisons of measured values of the prototyped resonator model with CST-designed and HFSS-designed simulated values are found in good agreement in terms of design frequency 2.45 GHz, reflection and transmission coefficient values, and -10 dB bandwidth values. The equivalent circuit model is validated using ADS software. The designed circuit parameter values are found to be in excellent match with manually evaluated circuit parameters with tolerances under +/- 20%. Selectivity of the ring resonator is investigated for applicability of proposed resonator filter for practical applications. The hybrid resonator is good for the measurement of dielectric permittivity and loss tangent estimations at any frequency without the need for a calculator. The effective parameters are evaluated for characterizations of dielectric properties and their behavior as metamaterials. These attributes make the proposed hybrid ring resonator a highly versatile and efficient solution for next generation communication devices and applications.Öğe Compact metasurface antenna for Sub-6 GHz applications with isolated n77/n78 bands using CSRR(IOP Publishing Ltd, 2025) Varshney, Atul; Kumar, Satyam; Gencoglan, Duygu Nazan; Tiwari, Satyam; Ara, Shabnam; Elfergani, Issa; Zebiri, Chemseddine; Rodriguez, JonathanA compact (0.35 lambda 0 x 0.35 lambda 0 where lambda 0 is free space wavelength at the lower resonance frequency 3.50 GHz) bio-inspired tulip flower-shaped antenna (TFSA) is proposed. A double negative (DNG) metamaterial complementary split ring resonator (CSRR) is introduced near the feed in the hybrid triangular-circular patch which inserts a notch-band (4.20-4.38 GHz) in the wide bandwidth (3.15-7.05 GHz) and makes the antenna response dual-band. Consequently, this results in in-band interference reduction in 5G-Sub-6 GHz applications. A slotted FSS is placed at a distance of 28.507 mm beneath the monopole-reduced ground of the antenna to enhance the reduced gain from 4.39 dBi to 7.22 dBi. A further gain is improved to 12.84 dBi by placing a full copper surface (0.35 lambda 0 x 0.35 lambda 0 ) as the reflector layer is placed below FSS at 1.6 mm. Finally, prototyped TFSA with FSS and reflector model achieve a dual bands reflection coefficient response (3.15-4.20 GHz): n77/n78, and (4.38-7.03 GHz): n46/n47/n96/n102/n79. The antenna reflection coefficient is tested using Keysight 14 GHz FieldFox Microwave Analyzer N9916A, and radiation patterns in the E-plane and H-plane are measured using an 18 GHz anechoic chamber. The comparison of simulated results with measured results is found an excellent match in bandwidth and with shapes of gain radiation patterns. The reflector and FSS jointly make the radiation pattern strong in the E-plane above the TFSA radiator. The antenna is well suited for n77/n78 (3.30-4.20 GHz), n79(4.40-4.99 GHz), n46 (5150-5925 MHz), n47 (5855-5925 MHz), n96/n102 (5925-6425 MHz), 5.8 GHz HiperLAN, WiMAX 3.5 GHz applications. An electrical equivalent circuit model of the proposed TFSA antenna is presented and validated using ADS software.