Yazar "Cora, Omer Necati" seçeneğine göre listele

Listeleniyor 1 - 2 / 2
  • [ X ]
    Öğe
    Influence of processing parameters on the porosity, thermal expansion, and oxidation behavior of consolidated Fe22Cr stainless steel powder
    (Elsevier, 2021) Ozturk, Bulent; Topcu, Alparslan; Cora, Omer Necati
    The objective of this study was to determine the effects of powder metallurgy process parameters on the porosity, coefficient of thermal expansion, and oxidation behaviors of porous ferritic Fe22Cr stainless steel compacts. Optimum values of the process were also investigated. The results showed that, porosity and the coefficient of thermal expansion decrease with increasing process parameters; and changing powder shape from spherical to flaky at a certain extent. The minimum and maximum porosity values of the samples were recorded as 7% and 30%, respectively. While those for the samples produced from milled powders were noted as 3%, and 19%, respectively. The coefficient of thermal expansion values were measured at 800 degrees C and found to be in the range of 12-14.5 x 10(-6) K-1 for spherical powders and flaky powders. From oxidation kinetics point of view, both process parameters and powder shape influenced the oxidation behavior. (C) 2020 Elsevier B.V. All rights reserved.
  • [ X ]
    Öğe
    Oxidation, electrical and mechanical properties of Crofer®22 solid oxide fuel cell metallic interconnects manufactured through powder metallurgy
    (Pergamon-Elsevier Science Ltd, 2018) Ozturk, Bulent; Topcu, Alparslan; Ozturk, Sultan; Cora, Omer Necati
    This study aimed to investigate oxidation, electrical and mechanical properties of solid oxide fuel cell interconnects. To this goal, two different Crofer (R) 22 interconnects samples were produced via different manufacturing routes (machining from bulk material, and powder metallurgy approach). The samples were characterized by scanning electron microscopy with energy dispersive spectroscopy (SEM-EDS), X-ray diffractions. Four-probe area specific resistance (ASR), bonding strength, leakage tests were also performed. The results indicated that interconnect sample manufactured through powder metallurgy approach can be a reliable alternative to the one manufactured from commercially available Crofer (R) 22 alloy in bulk form. (C) 2018 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.