Yazar "Akar, Samet" seçeneğine göre listele
Listeleniyor 1 - 5 / 5
Sayfa Başına Sonuç
Sıralama seçenekleri
Öğe A study on the ?wire-EDM of Ni55.8Ti shape memory superalloy: an experimental investigation and a hybrid ANN/PSO approach for optimization(Springer Heidelberg, 2023) Akar, Samet; Seyedzavvar, Mirsadegh; Boga, CemThe unique properties of high hardness, toughness, strain hardening, and development of strain-induced martensite of nickel-titanium superalloys made the micro-wire electro discharge machining (mu wire-EDM) process one of the main practical options to cut such alloys in micro-scale. This paper presents the results of a comprehensive study to address the response variables of Ni55.8Ti superalloy in mu wire-EDM process, including the kerf width (KW), material removal rate (MRR), arithmetic mean surface roughness (R-a) and white layer thickness (WLT). To this aim, the effects of pulse on-time (T-on), pulse off-time (T-off), discharge current (I-d) and servo voltage (SV) as input parameters were investigated using the experiments conducted based on Taguchi L-27 orthogonal array. The results were employed in the analysis of variance (ANOVA) to examine the significance of input parameters and their interactions with the output variables. An optimization approach was adopted based on a hybrid neural network/particle swarm optimization (ANN/PSO) technique. The ANN was employed to achieve the models representing the correlation between the input parameters and output variables of the mu wire-EDM process. The weight and bias factor matrices were obtained by ANN in MATLAB and together with the feed forward/backpropagation model and developed functions based on PSO methodology were used to optimize the input parameters to achieve the minimum quantities of KW, R-a and WLT and the maximum value of MRR, individually and in an accumulative approach. The results represented a maximum accumulative error of nearly 8% that indicated the precision of the developed model and the reliability of the optimization approach. At the optimized level of input parameters obtained through the accumulative optimization approach, the KW, R-a, and WLT remained nearly intact as compared with the levels of responses obtained in the individual optimization approach, while there was a sacrifice in the machining efficiency and reduction in the MRR in the mu wire-EDM process of Nitinol superalloy.Öğe Micro-WEDM of Ni55.8Ti shape memory superalloy: Experimental investigation and optimisation(Inderscience Publishers, 2021) Meshri, Hassan Ali M.; Akar, Samet; Seyedzavvar, Mirsadegh; Kiliç, Sadik EnginNickel-titanium superalloy has gained significant acceptance for engineering applications as orthotropic implants, orthodontic devices, automatic actuators, etc. Considering the unique properties of these alloys, such as high hardness, toughness, strain hardening, and development of straininduced martensite, micro-wire electro-discharge machining (?-WEDM) process has been accepted as one of the main options for cutting intricate shapes of these alloys in micro-scale. This paper presents the results of a comprehensive study to address the material removal rate (MRR) and surface integrity of Ni55.8Ti shape memory superalloy (SMA) in the ?-WEDM process. The effects of discharge current, pulse on-time, pulse off-time, and servo voltage on the performance of this process, including MRR, white layer thickness, surface roughness, and micro-hardness of the machined surface, were investigated by multi-regression analysis using response surface methodology (RSM). The optimisation of input parameters based on the gradient and the swarm optimisation algorithms were also conducted to maximise the MRR and minimise the white layer thickness, surface roughness, and micro-hardness of the machined samples. © 2021 Inderscience Enterprises Ltd.. All rights reserved.Öğe Molecular dynamic approach to predict thermo-mechanical properties of poly(butylene terephthalate)/CaCO3 nanocomposites(Elsevier Ltd, 2021) Seyedzavvar, Mirsadegh; Boğa, Cem; Akar, Samet; Pashmforoush, FarzadThermo-mechanical properties of poly(butylene terephthalate) polymer reinforced with carbonate calcium nanoparticles have been investigated using molecular dynamics simulations. Detailed analyses have been conducted on the effects of nanofiller content, at concentration levels of 0–7 wt%, on the mechanical properties of PBT, i.e. Young's modulus, Poisson's ratio and shear modulus. Thermal properties, including thermal conductivity and glass transition temperature, have been determined using Perl scripts developed based on nonequilibrium molecular dynamics and a high temperature annealing procedure, respectively. Experiments have been performed to verify the accuracy of the results of MD simulations. The CaCO3/PBT nanocomposites were synthesized using melt blending and mold injection techniques. The uniaxial tensile test, thermal conductivity, differential scanning calorimetry and x-ray diffraction spectroscopy measurements were conducted to quantify the thermo-mechanical properties of such nanocomposites experimentally. The results showed significant improvements in the mechanical properties by addition of CaCO3 nanoparticles due to strong binding between rigid particles and PBT polymer and high nucleation effects of nanoparticles on the matrix. Thermal conductivity and glass transition temperature of nanocomposites represented a consistent increase with the ratio of CaCO3 nanoparticles up to 5 wt% with an enhancement of 38% and 36% with respect to that of pure PBT, respectively. © 2021 Elsevier LtdÖğe Numerical simulation and experimental investigation: Metal spinning process of stepped thin-walled cylindrical workpiece(Murat Yakar, 2022) Seyedzavvar, Mirsadegh; Seyedzavvar, Mirali; Akar, Samet; Abbasi, HosseinMany equipment and devices utilized in the aerospace industry are formed as symmetric parts through high plastic deformation of high strength sheet metal alloys with low thickness. Considering the inherent advantages of the spinning process of simple tooling and concentrated deformation loading, this process can be considered as one of the main options in producing these thin-sectioned lightweight parts. In this study, a Finite Element (FE) model has been developed to simulate the formation of a stepped thin-walled cylindrical workpiece of AISI 316 stainless steel alloy by spinning process. The FE simulation results were employed to investigate the effects of process parameters, including feed rate of the roller and rotational velocity of the mandrel on the distribution of stress and strain in the sheet metal, wrinkling failure, and thinning of the sheet metal during deformation. Experiments were carried out using selective input parameters based on the results of FE simulations. The comparison between FE simulations and experiments revealed that the developed model could predict the thinning of the sheet metals with over 93 % accuracy. Additionally, a good agreement between the experimentally deformed sheet configurations with those resulting from finite element simulations has been observed. © Author(s) 2022.Öğe Prediction of white layer formation in ?-WEDM process of NiTi shape memory superalloy: FEM with experimental verification(Springer Science and Business Media Deutschland GmbH, 2021) Ilkhchi, Reza Najati; Akar, Samet; Meshri, Hassan Ali M.; Seyedzavvar, MirsadeghMicroscopic changes in the surface of nickel-titanium (nitinol) shape memory alloys (SMAs) in micro-wire electro-discharge machining (?-WEDM) due to the formation of a resolidified layer on the machined surface, called white layer, are one of the main drawbacks in the processing of such alloys. Since these changes significantly affect the shape memory and elastic recovery characteristics of these alloys, reduction of the white layer thickness (WLT) based on the selection of optimum process parameters is essential to raise the quality of the machined parts. In this regard, a finite element model (FEM) has been developed to simulate the effects of ?-WEDM process parameters, including discharge current, pulse on-time, pulse off-time, and servo voltage, on the heat distributing in Ni55.8Ti SMA to predict the WLT. The flushing efficiency of electric discharges and the effect of flow regime of the dielectric fluid on the heat distribution in the workpiece and the formation of the WLT are analyzed. Experimental data are used to verify the accuracy of the FEM. The results show that the developed model can predict the WLT in ?-WEDM process of Ni55.8Ti SMA with an average error of 14%. The effects of discharge parameters on the formation of the WLT are discussed in details based on the results of the FEM. © 2021, The Author(s), under exclusive licence to Springer-Verlag London Ltd. part of Springer Nature.
