• Karışık taşınım ile olan ısı transferinin farklı geometrideki akış engelleri kullanılarak iyileştirilmesinin sayısal olarak incelenmesi 

  Ozdemir, Sedat; Kilic, Mustafa; Calisir, Tamer; Baskaya, Senol (Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi = Journal of the Faculty of Engineering and Architecture of Gazi University / Gazi Üniversitesi = Gazi University, 2023-01)

  Bu çalışmada; içinde ısı akısına sahip, farklı konum ve geometride engeller bulunan dik bir kanaldaki karışık konveksiyonun ısı transferine ve akış özelliklerine etkisi sayısal olarak incelenmiştir. Engellerin konumları, ...
• Effect of adherend recessing on bi-adhesively bonded single-lap joints with spew fillet 

  Calik, Ahmet; Yildirim, Sefa (SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES / INDIAN ACAD SCIENCES, 2017-03)

  The effect of adherend recessing on the strength of full (spew)-fillet-formed bi-adhesively bonded single-lap joint (SLJ) was investigated using the finite-element (FE) method under pure tension (i.e., 20 dissimilar recess ...
• Numerical analysis of the thermal and thermodynamic performance of a parabolic trough solar collector using SWCNTs-Therminol (R) VP-1 nanofluid 

  Mwesigye, Aggrey; Yilmaz, Ibrahim Halil; Meyer, Josua P. (RENEWABLE ENERGY / ELSEVIER SCIENCE LTD, 2018-04)

  In this paper, energetic and exergetic performances of a parabolic trough solar collector using single walled carbon nanotubes (SWCNTs)-Therminol (R) VP-1 nanofluid were numerically investigated and presented. The main ...
• NUMERICAL INVESTIGATION OF COMBINED EFFECT OF NANOFLUIDS AND MULTIPLE IMPINGING JETS ON HEAT TRANSFER 

  Kilic, Mustafa; Ali, Hafiz Muhammad (THERMAL SCIENCE / VINCA INST NUCLEAR SCI, 2019)

  The present study is focused on numerical investigation of heat enhancement and fluid-flow from a heated surface by using nanofluids with three impinging jets. Effects of different volume ratio, different heat flux and ...
• Large Displacement Static Analysis of Composite Elliptic Panels of Revolution having Variable Thickness and Resting on Winkler-Pasternak Elastic Foundation 

  Kalbaran, Ozgur; Kurtaran, Hasan (LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES / LATIN AMER J SOLIDS STRUCTURES, 2019-10)

  Nonlinear static response of laminated composite Elliptic Panels of Revolution Structure(s) (EPRS) having variable thickness resting on Winkler-Pasternak (W-P) Elastic Foundation is investigated in this article. Generalized ...
• Effect of Inhomogeneity Constant on Equivalent Stresses in Elastic Analysis of Hollow Cylinder Made from Functionally Graded Material 

  Boga, Cem (Gazi University Journal of Science / Gazi Üniversitesi, 2020-03)

  In this study, the determination of the equivalent stresses required for the elastic analysis of a hollow cylinder made of functional graded material (FGM) subjected to internal and external pressures was determined quickly ...
• An experimentally validated numerical method for investigating the air blast response of basalt composite plates 

  Susler, Sedat; Kurtaran, Hasan; Turkmen, Halit S.; Kazanci, Zafer; Lopresto, Valentina (MECHANICS OF ADVANCED MATERIALS AND STRUCTURES / TAYLOR & FRANCIS INC, 2020)

  Nonlinear air blast response of basalt composite plates is analysed by using a generalized differential quadrature (GDQ) method, which requires less solution time and decreases the complexity compared to finite element ...
• On coupling methods used to simulate the dynamic characteristics of heavy ground vehicles subjected to crosswind 

  Tunay, Tural; Drugge, Lars; O'Reilly, Ciaran J. (JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS / ELSEVIER, 2020-06)

  Ground vehicles often encounter turbulent flows with wide range of scales, e.g. crosswind gusts, when moving on-road conditions. Crosswinds can be considered as an important factor in heavy vehicle's roll-over accident due ...
• Comparison of effects of nanofluid utilization (Al2O3, SiO2, TiO2) with reference water in automotive radiators on exergetic properties of diesel engines 

  Erkan, Anil; Tuccar, Gokhan; Tosun, Erdi; Ozgur, Tayfun (SN APPLIED SCIENCES / SPRINGER, 2021-02)

  In this study, nanofluids formed by using ethylene glycol and three kinds of nanoparticles such as Al2O3, SiO2, and TiO2 were added to the four-stroke internal combustion engine radiator and compared with the conventional ...
• Estimation of hourly global solar radiation using artificial neural network in Adana province, Turkey 

  Goncu, Onur; Koroglu, Tahsin; Ozdil, Naime Filiz (JOURNAL OF THERMAL ENGINEERING / YILDIZ TECHNICAL UNIV, 2021-12)

  Since global solar radiation (GSR) is an important parameter for the design, installation, and operation of solar energy-based systems, it is important to have precise information about it. As the indicating devices are ...
• A new approach for selecting the most suitable oilseed for biodiesel production; the integrated AHP-TOPSIS method 

  Abdulvahitoglu, Asli; Kilic, Mustafa (AIN SHAMS ENGINEERING JOURNAL / ELSEVIER BV, 2022-05)

  The rapid growth of the world's population and industrial revolution has led to an increase in the need for energy. However, the scarcity of fossil fuels and serious environmental pollution problems have attracted researchers ...
• Numerical simulation and experimental investigation: Metal spinning process of stepped thin-walled cylindrical workpiece 

  Seyedzavvar, Mirsadegh; Seyedzavvar, Mirali; Oliaei, Samad Nadimi Bavil; Abbasi, Hossein (Turkish Journal of Engineering (TUJE) / Murat YAKAR, 2022-01)

  Many equipment and devices utilized in the aerospace industry are formed as symmetric parts through high plastic deformation of high strength sheet metal alloys with low thickness. Considering the inherent advantages of ...
• Examining the Influential Parameters on Reducing both Energy and Time Requirements in Open-Source 3D Printers 

  Korkut, Volkan; Yavuz, Hakan (Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi (FBED) = Journal of The Institute of Science and Technology (JIST) / Iğdır Üniversitesi, 2022-03)

  The need for Fused Filament Fabrication (FFF) type 3D printers in additive manufacturing family is increasing day by day. In parallel to the accelerating developments in these devices, the technical difficulties and the ...
• Noise and Disturbance Rejection Performance Evaluation on Explicit Model Predictive Control Technique Applied to Inverted Pendulum with Various Test Scenarios 

  Ozgur, Huseyin Emre; Ozbek, Necdet Sinan; Sarigecili, Mehmet Irtelis (Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi = Cukurova University Journal of the Faculty of Engineering / Çukurova Üniversitesi, 2022-10)

  An inverted pendulum on a cart (IPC) system, which is a widely used test environment for controller design due to ease of applicability, has the opportunity to be applied in different fields with nonlinear and under-actuated ...
• DİK KANAL İÇERİSİNDEKİ KARIŞIK TAŞINIM İLE ISI TRANSFERİNİN YARI SİLİNDİRİK AKIŞ ENGELLERİ KULLANILARAK İYİLEŞTİRİLMESİNİN SAYISAL OLARAK İNCELENMESİ 

  Ozdemir, Sedat; Kilic, Mustafa; Calisir, Tamer; Başkaya, Şenol (Isı Bilimi ve Tekniği Dergisi = Journal of Thermal Science and Technology / Türk Isı Bilimi ve Tekniği Derneği, 2022-04)

  Bu çalışmada; dik ve içinde ısı akısına sahip yarı silindirik engeller bulunan bir kanaldaki karışık konveksiyonun ısı transferine ve akış özelliklerine etkisi sayısal olarak incelenmiştir. Yarı silindirik engellerin ...
• Hareketli Bir Plakadan Olan Isı Transferinin faklı Nanoakışkanlar ve Çarpan Jetle İncelenmesi 

  Kilic, Mustafa; Efeoglu, Mine (Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi = International Journal of Engineering Research and Development / Kırıkkale Üniversitesi, 2022-01)

  Bu çalışmada, nanoakışkanların çarpan akışkan jet tekniği ile oluşturduğu müşterek etkinin, yüksek ısı akılı hareketli bakır bir plakadan olan ısı transferine etkisi sayısal olarak incelenmiştir. Çalışmanın ilk aşamasında, ...
• Energy Analysis in a Solar House with Building-Integrated Photovoltaic (BIPV) System 

  Tantekin, Atakan; (Tumen) Ozdil, N. Filiz (Çukurova Üniversitesi Mühendislik Fakültesi Dergisi = Cukurova University Journal of the Faculty of Engineering / Çukurova Üniversitesi, 2022-10)

  Increased energy demand and fossil fuel usage of the world has led to the search for new and clean energy production methods. Renewable energy sources are developing and emerging options for energy production methods. Sun ...
• Soğutma Panellerinde Kullanılabilecek Yeni Tip Kompozit Yalıtım Malzemelerin Sayısal İncelenmesi 

  Kılıc, Mustafa; Yanardag, Mehmet (Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi = Cukurova University Journal of the Faculty of Engineering / Çukurova Üniversitesi, 2020-09)

  Enerji tasarrufu, ısıtma ve soğutma sisteminde karşılaşılan en önemli problem sahalarından birisidir. Soğutma panellerinde ısı kaybının azaltılması; işletme maliyetinin azaltılması, sistem veriminin arttırılması ve enerji ...
• Fracture energy comparison of aluminum and boron composites for fuel cell end plates 

  Avcu, Adem; Choupani, Naghdali; Tuccar, Gokhan (International Journal of Energy Applications and Technologies / İlker ÖRS, 2020-12)

  Fuel cells have become an attractive choice because they do not cause environmental and noise pollution. Additionally, they do not contain any moving parts and have higher efficiency than fossil fuels. Therefore, improving ...
• Alternatif Yakıt Olarak Lignoselülozik Etanol Üretimi: İplikhane Pamuk Telefleri Üzerine Bir Çalışma 

  Abdulvahitoglu, Asli (Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi = Cukurova University Journal of the Faculty of Engineering / Çukurova Üniversitesi, 2019-07)

  Enerji talebi, teknolojinin ve sanayinin gelişmesine paralel olarak her geçen gün artmakta, diğer taraftan en eski ve en çok kullanılan enerji kaynağı olan fosil yakıtlar artan enerji ihtiyacı ile birlikte hızla tükenmektedir. ...

View more